Bambu Lab A1 Mini
- Item Id 30133
- Variation ID 12560
- EAN 6975337036173
- Mfg part No, PF002-M-EU
The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
HighlightsBambu Lab A1 Mini
The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The cutting-edge algorithm dynamically adjusts the flow rate based on sensor data, ensuring unrivaled printing accuracy.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Full-Auto Calibration
A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Auto Z-Offset
A1 mini probes the bed with the nozzle to measure the absolute z-offset. No need to stick a paper as reference.
Auto Vibration Calibration
A1 mini has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.
Auto Flow Dynamics
First of its kind, A1 mini runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 mini handles Pressure Advanced calibration automatically.
Auto Belt Tension
A1 mini can check the belt tension automatically through the vibration frequency calibration. If the belt is loose, the HMS system will notify you to use the auto belt tensioner to set the belt to the right tension.
Print Smooth At Every Corner, Always
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
High-speed Precision
Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Print Silently
Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB, making A1 mini one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard.
Quick Swap Nozzles
All-new quick swap hotend design, the hotend pops in and out with just 1 clip.
What's in the box
| Construction an Technical Details | |
| Compatible Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 300 ºC |
| Open Filament System | Yes |
| Recommended Max Printing Speed | 500 mm/s (depends on material) |
| Build Volume | 180 mm x 180 mm x 180 mm |
| Max Build Plate Temp | 80 ºC |
| Build Plate Surface | PEI |
| Build Chamber During Process | Open |
| Number of Extruders | 1 |
| Installation Space / Requirements | |
| Overall Dimensions | 347 mm x 315 mm x 365 mm |
| Net Weight | 5.5 kg |
| Max Power Consumption | 150 W |
| Voltage | AC: 100 V240 V (50-60 Hz) |
| Equipment | |
| Hepa Filter | No |
| Filament Runout Sensor | Yes |
| Filament Clogging Sensor | Yes |
| Power Loss Fail Safe | Yes |
| Touch Screen | Yes |
| Connection | |
| USB Port | No |
| WLAN | Yes |
| Accuracy | |
| Shipping | |
| Shipping Box | 385 mm x 430 mm x 430 mm |
| Gross Weight | 8.2 kg |
Loading reviews...
Other suitable products
