Bondtech CHT® Coated Brass Nozzle 0,4 mm -1 pcs

  • Tuote nr. 27096
  • Tuotenumero 8556
  • EAN 7350011414826
  • Valmistajan tuotenumero 600-C-CHT-MOS-175-40

These are nozzles for High Flow applications
They are manufactured by Bondtech in-house.

Features
  • 1 unit per pack
  • Available sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mm
  • Optimized for 1.75mm filament
  • Requires 6mm wrench
  • Lue lisää
    24,99
     
    Sis ALV ei sis. Toimitus
    Varastosaldo:  50+
    Toimitusaika Heti saatavilla
    Kysy tuotteesta
    Tuotekuvaus

    Main Advantages

    • Higher melt capacity by increasing the surface area of the heating walls
    • Affordable price
    • Machined with ultra-precision
    • Brass nozzle with Nickel coated surface
    • Follows the RepRap standard (M6×1×7.5×12.5)
    • May be used with 1.75 or 2.85mm hotends.

    Advantages of the Bondtech CHT™ technology:

    Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

    Core Heating is a patented technology

    Registration number: EP3445568A1
    Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.

    Advantages of the Nickel Coatin

    A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

    Recommended Materials

    Use this nozzle with the following materials:

    • PLA
    • ABS
    • HIPS
    • PC
    • TPU
    • TPE
    • Nylon
    • PETG
    • ASA
    • PP
    • PVA

    For technical and abrasive materials we recommend to use other nozzles in our range.

    Different nozzle sets for different materials

    We recommend you to have several sets of nozzles because:

    • Using different materials with the same nozzles causes deposit build-up inside the nozzle.
    • These deposits will cause blockages.
    • We recommend changing nozzles when changing materials.

    Check the White Paper:

    "Increasing Melt Capacity With 3 Nozzle Features"

    They are manufactured by Bondtech in-house, and will fit the following hotends/blocks:

    • Mosquito® / Magnum
    • Mosquito® Liquid
    • Mosquito® Magnum+
    • Copperhead™
    • E3D V4, V5 and V6 blocks
    • E3D Chimera and Kraken
    • RepRap M6
    Merkki Bondtech
    Tyyppi RepRap M6 1,75mm
    Materiaali Nikkelipinnoitettu messinki
    Halkaisija 0,40 mm
    Pakkaus 1
    Sopii Formbot Raptor
    Formbot T-Rex 2+ 500 mm
    Vivedino Formbot Raptor 2.0 - 500mm
    Vivedino Formbot Raptor 2.0 - 700mm
    Vivedino Formbot T-Rex 3.0 - 500mm
    Vivedino Formbot T-Rex 3.0 - 700mm
    INTAMSYS FUNMAT HT
    INTAMSYS FUNMAT HT Enhanced
    Anycubic Mega X
    Anycubic Mega Zero
    Vivedino Formbot T-Rex 3.0+ - 500 Dual Extruder Idex - 400x400x500mm - New upgraded version
    Vivedino Formbot T-Rex 3.0+ - 700 Dual Extruder Idex - 400x400x700mm - New upgraded version
    Vivedino Formbot Troodon - 400x400x500mm - Core XY Fully Enclosed
    Vivedino Formbot Troodon - 300x300x400mm - Core XY Fully Enclosed
    Vivedino Formbot Raptor 2.0+ -5 400x400x500mm - New upgraded version
    Vivedino Formbot Raptor 2.0+ -7 400x400x700mm - New upgraded version
    Formbot Voron V0 120x120x120mm
    Formbot Voron 2.4 300x300x300mm
    Formbot Voron 2.4 350x350x350mm
    Anycubic Kobra Max
    Anycubic Kobra
    Copymaster3D Voron2 V2.4 R2 Kit - 300 x 300 x 300mm
    Copymaster3D Voron2 V2.4 R2 Kit - 350 x 350 x 350mm
    Copymaster3D Voron0 V0.1 Kit - 120 x 120 x 120 mm
    Copymaster3D Voron2 V2.4 R2 Kit - 250 x 250 x 250mm
    Copymaster3D Voron Trident Kit - 250 x 250 x 250mm
    Copymaster3D Voron2 V2.4 R2 Kit - 300 x 300 x 300mm
    Copymaster3D Voron Trident Kit - 300 x 300 x 250mm
    Copymaster3D Voron Trident Kit - 350 x 350 x 250mm
    Copymaster3D Voron0 V0.2 Kit - 120 x 120 x 120 mm
    Copymaster3D Voron2 V2.4 R2-SB Kit - 350 x 350 x 350mm - With StealthBurner
    Prusa i3MK2/MK3
    E3D V5-V6
    Mosquito® / Magnum
    Mosquito® Liquid
    Mosquito® Magnum+
    Copperhead™
    E3D V4, V5 & V6 Blöcke
    E3D Chimera & Kraken

    Kysy tuotteesta?

    Olen lukenut privacy policy. Hyväksyn että tietojani kerätään ja käytetään elekronisesti palvelun mahdollistamiseksi.
    * Lihavoidut kentät vaaditaan. HUOM! Voit muuttaa asetuksia koska vain ottamalla yhteyttä asiakaspalveluumme sähköpostitse info@3dprima.com
    ;CNC & LaserEngraving