FlowTech™ CHT High Flow - CM2™ Nozzle

  • Artikel nr. 31994
  • Variations-id 16168
  • EAN 0850041631615
  • Producentens ArtNr M2907-08

Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2™ nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special WS2 nonstick nano coating.

Læs mere
Dysediameter: ⌀ 0.80 mm
⌀ 0.40 mm
⌀ 0.60 mm
⌀ 0.80 mm
⌀ 1.00 mm
DKK 269,00
 
Inkl. Moms ekskl Forsendelse
Spørgsmål om artiklen
Produkt beskrivelse

Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2™ nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special  WS2 nonstick nano coating.

CHT - CM2™ Nozzle Features:

  • Copper Chromium Zirconium body
    • Plated with an Electroless Nickel Plating
  • M2 Hardened High Speed Steel insert
    • Plated with an Electroless Nickel Plating
    • Coated with nonstick nano WS2 coating.
    • Coefficient of friction: 0.035
    • Heat-treated hardness:  68 HRC
  • High Flow CHT Technology
    • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec
    • More uniform layer deposition is achieved by splitting the filament  flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
  •     Orifice size available: .4mm, .6mm, .8mm, 1.0mm


Made in Sweden by Bondtech
Assembled in USA by Microswiss

Spørgsmål om artiklen?

Jeg læste privatlivspolitik . Jeg accepterer, at mine data og data indsamles og opbevares elektronisk for at svare på min anmodning.
* Dette er et obligatorisk felt.
;CNC & LaserEngraving