Raise3D Hyper Speed Auto Calibrator Pro3 Series
- Artikelnr. 28546
- Varianten Id 10083
- EAN 6970240728870
- Hersteller Nr. [S]3.01.1.024.057A01
With this auto frequency calibrator, the Pro3 Series printer will be able to measure its own frequency and adjust the parameters by itself. With Pro3 Series’ robust construction and stable design, the printer can keep its own frequency for months without shifting. It is recommended that the calibration process be carried out every 2-3 months. A manual calibration process is also included.
Hyper Speed Auto Calibrator
With this auto frequency calibrator, the Pro3 Series printer will be able to measure its own frequency and adjust the parameters by itself. With Pro3 Series’ robust construction and stable design, the printer can keep its own frequency for months without shifting. It is recommended that the calibration process be carried out every 2-3 months. A manual calibration process is also included.
Please note that for Hyper Speed to function correctly, the Hyper Speed Hot Ends 0.4mm (Pro3 Series Only), the Hyper Speed Auto Calibrator (Pro3 Series Only), and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.
Rezensionen werden geladen...
Weitere passende Prdoukte
- Schwarz
- 1.75mm
- 1 kg
- Schwarz
- 1.75mm
- 1 kg
- Weiss
- 1.75mm
- 1 kg
- Weiss
- 1.75mm
- 1 kg
- Gelb
- 1.75mm
- 1 kg
- Gelb
- 1.75mm
- 1 kg
- Rot
- 1.75mm
- 1 kg
- Rot
- 1.75mm
- 1 kg
- Orange
- 1.75mm
- 1 kg
- Orange
- 1.75mm
- 1 kg
- Grau
- 1.75mm
- 1 kg
- Grau
- 1.75mm
- 1 kg
- Blau
- 1.75mm
- 1 kg
- Blau
- 1.75mm
- 1 kg
